AIR IR Imaging Module
Low Power (AIR-LP)

 

General

  • High range performance
  • Advance image processing algorithms
  • Low power consumption
  • Compact size
  • Light weight
  • Robust structure
  • Fast start up time
  • Different lens alternatives available
  • Video and control interface for Day TV

Application

  • Thermal Weapon Sights
  • Hand Held Systems
  • Driver Vision Systems
  • Missile Seekers
  • Reconnaissance and Surveillance Systems
  • Weapon Stations
  • Situational Awareness Systems
  • Unmanned Aerial Vehicles

Array Specifications

Array Type Uncooled microbolometer
Material ASi
Detector Pitch (A) 17 µm x 17 µm
Detector Pitch (B) 12 µm x 12 µm
Spectral Band 8 µm to 14 µm
Resolution 640 (Horizontal) x 480 (Vertical) 
Sensitivity (f#1.0, 300 K) < 50 mK (for A)
< 30 mK (for A)
< 60 mK (for B)
< 50 mK (for B) 
Pixel Operability > 99.5 %

 

Mechanical Interface

Dimension 42 mm x 42 mm x 40 mm
PCB Dimensions 32 mm x 32 mm 
Weight < 60 gr

 

Performance

Frame Rate 50 Hz (configurable up to 60 Hz)
Time-to-image < 1.2 sec
Digital Zoom X1, X2, X3, X4
Digital Zoom Continuous From X1 to X4 with 0.02 steps
Power Supply Standard Version: 2.8 V to 5.5 V
Extended Version: 6 V to 17 V
Power Consumption Video output:Parallel video < 0.6 W
Video output:Parallel video + Analog Video < 0.72 W
Video output:Parallel video + Analog Video Ethernet (optional) < 1.2 W
Video output:Cameralink video (optional) < 1 W
Video output:Cameralink video (optional) + Analog Video < 1.2 W
Note: In all modes, image processing algorithms except local contrast enhancement are active. When local contrast enhancement is enabled, power consumption will be increased by 40 mW.
Noise Cancelation Adaptive Temporal and Spatial Noise Cancelation
Detail Enhancement Edge Aware Adaptive Digital Detail Enhancement
Image Enhancement Plateau-based Adaptive Histogram Equalization/ Linear/ Manual
Contrast Enhancement Local Contrast Enhancement
Color Palette Up to 8 different palettes
Live Calibration With Shutter (periodic or externally controllable)

 

Interfaces

Day TV LVDS or Parallel Video Interface
RS232 control interface
Connectors DF20G-40DP-1V (56) Hirose 40 pin board-to-cable
USL00-30L-B (Sony Connector for Day TV option)
Mating Connectors DF20A-40DS-1C (Main connector, 40 pin)
USL20-30SS-012.0-B (Sony connector for Day TV option)
Communication RS-232 (9600/19200/38400/57600/115200)
Ethernet (1 Gbps) (optional)
GPIO
Note: In GPIO mode, only basic controls are available.
Digital Video Output Parallel Video 1.8 V or 3.3 V LVCMOS: 8 Data + Vsync + Hsync + Pixclk
Ethernet (optional): Real-Time Transport Protocol. Payload type is RFC4175
Cameralink (optional)
Analog Video Output PAL
GPIO 5 pins 1.8 V or 3.3 V LVCMOS (Configurable with respect to customer requirements)
External Trigger Yes (controlled with 1 GPIO)

 

Environmental Conditions

Working Temperature [-40 °C, +71 °C]
Storage Temperature [-40 °C, +75 °C]

 

Write down the word you are searching for and press "enter".
Press "ESC" to close.